« previous next »
Pages: [1]   Go Down

Author Topic: Blades are squeaking on low speeds  (Read 7426 times)

Offline Shadarley

  • Newbie
  • *
  • Posts: 9
    • View Profile
Blades are squeaking on low speeds
« on: June 03, 2012, 09:54:29 am »
Hi everyone,

I've had my TMX for nearly a year now and use it at least 4 times a weeks (between using the BBQ and the oven for cooking).  In the last week I have come to notice my blades are squeaking when being used on speed 3 and lower.  I have done the test to make sure that there is no problem with free wheeling (as discussed in some other threads).  The sound seems to be coming from between the plastic spline and the plastic base with the two locator prong things.  So its below the rubber seal so its not on the food side of the blades.  Does this require any lubrication or is it thinking about packing it in?  I do tend to pull the bowl and blades apart regularly  to wash as I feel I get a better clean when cooking things with fats or proteins in it.

Thanks in advance

Chris
Logged

Offline cookie1

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 37603
    • View Profile
Re: Blades are squeaking on low speeds
« Reply #1 on: June 03, 2012, 10:32:03 am »
How loud is the squeek? If it's loud and piercing, like a squeal I'd seek help. If it's soft and intermittent I wouldn't worry.
If you are concerned give your consultant a call.
Logged
May all dairy items in your fridge be of questionable vintage.

https://www.facebook.com/The-Retired-Thermomixer-834601623316983/

Offline dede

  • Hero Member
  • *****
  • Posts: 6529
    • View Profile
    • Mandi's Picture Framing
Re: Blades are squeaking on low speeds
« Reply #2 on: June 03, 2012, 10:49:07 am »
You can place a tiny bit of oil where the base of the bowl sits in the machine (not where the prongs go in) but the roundish hole thingy. It has been discussed before and I have had mine squeak at times too.
Just remember never put anything where the prongs go in.
Logged
Mandi, Mum of 5, Live in Tasmania. Work from home picture framing.

Offline Shadarley

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Blades are squeaking on low speeds
« Reply #3 on: June 03, 2012, 10:57:49 am »
Yes I was just reading the thread that popped up above this one!
Logged

Offline cecilia

  • Hero Member
  • *****
  • Posts: 1377
  • Renew. Refresh. Rejoice.
    • View Profile
    • Thermorevolution
Re: Blades are squeaking on low speeds
« Reply #4 on: June 03, 2012, 11:39:47 am »
Shadarley,  I would be worried - do call you consultant and ask that the Thermomix be serviced.  I had a customer recently who had a high pitched squeal that turned out to be an indicator that her TMX had a problem in the motor.
Logged
"Be kind whenever possible. It is always possible." — Dalai Lama

https://www.facebook.com/thermorevolution

Offline Merlin

  • Hero Member
  • *****
  • Posts: 659
    • View Profile
Re: Blades are squeaking on low speeds
« Reply #5 on: June 03, 2012, 01:10:51 pm »
I started a thread on a low pitched squeak a while ago I was getting at speeds 1-2. It seems to have stopped  spontaneously and given the amount of use my TM gets I'm relieved although it was never that much of a major problem- it's just that I had never had it before. I agree that a high pitched noise would need to be sorted out though.
Logged
"There are two ways to live your life. One is as though nothing is a miracle. The other is as if everything is"
Albert Einstein

Offline Shadarley

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Blades are squeaking on low speeds
« Reply #6 on: June 03, 2012, 02:35:05 pm »
I'll send her an email tomorrow. But I have isolated it in the blade assembly and not in the machine housing which is a blessing in disguise.
Logged
Pages: [1]   Go Up
« previous next »